horiba DS-71, Instruction Manual, Page: 16 / 78

Chapter 2 Information of the DS-71
2.3 Names and Functions
6 HORIBA
2.3.3 Operation Key
This instrument employs capacitance switches.
You can not operate them with thick gloves. Operate
them with bare hands or thin rubber gloves.
Operation key Function
CAL key /stops Starts calibration or enters the
calibration mode.
MEAS key /stops Starts measurement or enters the
measurement mode.
Applies the setting values of the setting
mode.
DATA key Enters the data operation mode.
Printouts calibration value.
SET key Enters the setting mode.
Cancels the setting values of the setting
mode.
MODE key Toggles the measurement items.
▲
key
▼
key
Increases the values.
Decreases the values.
Switches the setting item.
Switches the CH items.
▼ ▲
key
Change number of digits, selects functions.
Printouts measurement values. (
▼
key)
ENTER key Settlement, execution, prinout
(except measurement values)
Start/stops automatic data memory.
POWER key Turns ON or OFF the power.
Press the POWER key for 1 second or longer to turn ON the
power, for 2 seconds or longer to turn OFF the power.