Chapter 4 RS-232C communications
4.5 Communication example using the Hyper Terminal
54
4.5
Communication example using the Hyper Terminal
For reference, communication using the HyperTerminal that comes with
Windows is described here.
1.
Open the HyperTerminal.
[Start] > [Programs] > [Accessories] > [Communications] >
[HyperTerminal]
The HyperTerminal program (Hypertrm.exe) is activated.
2.
Make the setting for name, connection, and port.
Select the COM port of your PC currently being used for the port
setting.
3.
Set the COM port of the PC and set the transmission parameters
as follows:
Baud rate: 2400 bps
Character length: 8 bits
Parity: none
Stop bit: 1 bit
4.
Make the settings in the properties dialog box.
[File] > [Properties] > [Settings]
