3 Functions
3.4 Setting modes
D-51
49
●
Initialization of setting [item No. 07]
This mode returns all settings to the default settings.
Use this mode to return the pH meter to the original set-
tings when the meter was purchased.
1.
Press the ENTER key to initialized the settings.
The setting values to be initialized are shown on page
77.
HINT!
Entering the Maintenance mode
2.
Press the MODE key to return to the first item in
the maintenance modes, LCD check.
Test print format
HINT!
Entering the Maintenance mode
Item No. 07
Item No.
selection
Maintenance mode
Measure-
ment mode
Item No.
selection
Maintenance mode
Measure-
ment mode
