horiba APNA-370, Operation Manual

Page: 20 / 113

3 MEAS. SCREEN (BASIC SCREEN)
8
Fig. 8 Mode icon
Fig. 9 AIC mode icon
Fig. 10 Saving icon
Note
When the Saving icon is displayed, do not turn OFF the power. If you do that, the data will not be
saved.
2: Current time
The current time is displayed.
For setting the current time, see “6.5.1 Time adjustment” (page 56).
3: [KEY LOCK] icon (button)
The key locked/unlocked mode is displayed.
When this icon is displayed in a box, it works as the operation button of key lock/unlock.
In this state, pressing this button displays the KEY LOCK screen (Fig. 95 on page 76) allowing
you to lock/unlock the keys.
Fig. 11 [KEY LOCK] icon (button)
When the keys are locked, you cannot operate with the screen; you can only view the screen.
This prevents any wrong operation from causing a modification in the settings.
Mode: This icon is illuminated when gas is being sucked through any line other than
the MEAS. line.
When the gas line is switched to the MEAS. line, this icon remains illuminated
during the MEASURE time specified in the AIC sequence.
AIC mode: This icon blinks when the AIC sequence is in progress.
Saving: This icon is illuminated when data is being written to the flash memory or when
the data logging capability (optional) is in use.
Data is saved when any setting is modified or every 10 minutes during data
acquisition.
Keys are locked Keys are unlocked