horiba APMA-370, Operation Manual

Page: 80 / 107

6 FUNCTIONALITIES
68
6.7.2 TCP/IP setting
When the [TCP/IP SETTING] button is pressed on the COMMUNICATION menu, the TCP/IP
SETTING screen will be displayed.
This screen allows you to complete the TCP/IP-related setting.
Fig. 87 TCP/IP SETTING screen
Immediately after this screen has appeared, the currently set values for IP address, subnet
mask, and default gateway are displayed on the corresponding buttons.
Pressing each IP ADDRESS button allows you to change the IP address
(see "

Changing the IP address" (page 69)).
Pressing each SUBNET MASK button allows you to change the subnet mask
(see "

Changing the subnet mask" (page 70)).
Pressing each DEFAULT GATEWAY button allows you to change the gateway
(see "

Changing the default gateway" (page 71)).
The displayed MAC address is fixed.
The keys allow you to perform the following operations.
[CLOSE]: Returns to the COMMUNICATION menu without changing the set values.
[SET]: Saves the changed values. To reflect the changed values, however, the
APMA-370 must be restarted.