horiba ABX MICROS ES60, User Manual

Page: 146 / 200

ABX Micros ES60 OT/CT
6–18 User Manual - RAB237AEN
8.3. Instrument startup and shutdown programming
8.3.1. Instrument startup programming
In the " Cycles " tab:
1- Press " On / Off " radio button.
2- Press " Edit " button.
3- In " Starting ", set the instrument startup time:
◆
Press " Hour " field to select it then enter the hour using the virtual keyboard or an external
keyboard (if one is connected).
◆
Press " Min " field to select it then enter the minutes using the virtual keyboard or an external
keyboard (if one is connected).
4- Check the corresponding check box(es) to select the day(s) when programmed startup will be
performed.
5- Press " OK " button.
8.3.2. Instrument shutdown programming
In the " Cycles " tab:
1- Press " On / Off " radio button.
2- Press " Edit " button.
3- In " Exit ", set the instrument shutdown time:
◆
Press " Hour " field to select it then enter the hour using the virtual keyboard or an external
keyboard (if one is connected).
◆
Press " Min " field to select it then enter the minutes using the virtual keyboard or an external
keyboard (if one is connected).
4- Check the corresponding check box(es) to select the day(s) when programmed shutdown will be
performed.
5- Press " OK " button.
The time programming is the same for each selected day.