horiba 6582S-10C, Instruction Manual

Page: 45 / 81

35
Electrode Preparation
Calibration
Measurement
After Measurement
6
Shake the electrode to remove any air bubbles remaining
on the ion selective membrane.
7
Perform the measurement.
Wait for a stable reading and measure the ion concentration as described
in the Meter Instruction Manual.
8
When the measurement of the ion concentration is
finished, take out the electrode from the sample solution.

It is recommended to place the electrode in the electrode
stand.

If gravel or other foreign matter gets in
the sample solution, for example,
when measuring outdoors, attach the
protective pipe. It will protect the ion
selective membrane of the electrode
from foreign matters in the sample
solution.
If air bubbles remain on the ion selective
membrane, it may result in inaccurate
measurement.
Tip Tip
Shake the
electrode
View video View video
Note Note