horiba 5002S-10C, Instruction Manual

Page: 46 / 79

34
6
Perform the measurement.
Wait for a stable reading and measure the ion concentration as described
in the Meter Instruction Manual.
7
When the measurement of the ion concentration is
finished, take out the electrode from the sample solution.
8
Rinse the electrode with pure water.
Make sure that the membrane part has been
well rinsed with pure water.
9
Wipe off the moisture.
Wipe off the moisture using soft and clean lint-free paper or cloth.

If air bubbles remain on the
membrane, it may result in inaccurate
measurement.

Do not hit the beaker with the
electrode. It may result in inaccurate
measuring.
View video View video
Note Note