Horiba Scientific LAQUAact D-75G, Instruction Manual

Page: 80 / 118

Using the automatic data save (default: OFF)
58
●
Using the automatic data save (default: OFF)
You can automatically save data in the internal memory at the specified interval.
While using this function, the automatic power off setting is disabled.
If the batteries run out while using the automatic data save function, the data saved until
just before the batteries run out. Replace the batteries and check the data.
1. Press the key to enter the setting mode.
2. Press the keys to select the "AT LOG" (automatic data save) and then
press the key.
3. Select "ON" to use this function, or select "OFF" not to use it. And then press
the key.
When "ON" is selected, enter the period setting of seconds, hours, and minutes, in
that order and press the
key.
key
key
key
key
Selected "ON"
and press the
key