Horiba Scientific LAQUAact D-75G, Instruction Manual

Page: 72 / 118

Printing measured values and calibration data
50
●
Printing measured values and calibration data
You can print out the measured value or calibrated value displayed on the instrument, or
the measurement data or the calibration data saved in the instrument. If repeatability
inspection has been inspected, the inspection data is printed out with the calibration
data.
Pressing the
key starts printing during displaying the data you want to save. Use the
printer cable (“ Options ” (page 92)) to connect the printer unit with the instrument
beforehand. If the automatic data memory is set to "ON", you cannot print out in the
measurement mode.
Measurement data is printed out both channel 1 and channel 2.
Reference
For details of how to display measurement data and calibration data, refer to the respective
section.
“ Displaying saved data ” (page 45)
“ Displaying the latest calibration and inspection data ” (page 47)
The format of the printout is shown on the next page when using pH (two point
calibration) and dissolved oxygen.