Horiba Scientific LAQUAact D-75G, Instruction Manual

Page: 37 / 118

Preparation
15
●
Setting the date and time
When using the instrument for the first time or after replacing the batteries, set the date
and time. After setting, the date and time data is displayed correctly when saving data in
the internal memory. If the setting is incorrect, the date and time of saved data becomes
incorrect. (Refer to “ Displaying saved data ” (page 45).)
1. Press the key to enter the setting mode.
2. Press the keys to select the "MAINT" (maintenance setting) and then press
the key.
3. Press the keys to select the "DATE" (date and time setting) and then press
the key.
4. Enter the "YEAR" (current year) and press the key.
5. In the same way, set the "DATE" (month and date) and "TIME" (hour and
minute), in that order.
To return to the setting mode, press the key.
key
key
key
key key