HTTP/HTTPS
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
GPS - NTP Time Server with LAN Interface 8029NTS-V2/GPS - V08.00
51 / 121
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
WebGUI with Alarming activated
Using SNMP and SNMP- traps the protocol SNMP should be enabled.
All fields must be filled in for a correct operation of SNMP. Contact your network administrator
for details of data not known.
7.3.2.4.1 SNMPv2 / SNMPv3 (Activation Key required)
Both protocols SNMPv2 and SNMPv3 are supported and can be configured and enabled
independently from each other.
System Location and System Contact are global settings and are valid for both protocols
(SNMPv2 / SNMPv3).
In order to disable SNMPv2 both fields
SNMP Read Only Community
and
SNMP Read Write
Community
must remain empty.
SNMPv2
SNMPv2 enabled
SNMPv2 disabled
Read Only Community:
set (e.g. public)
empty
Read/Write Community:
set (e.g. secret)
empty
In order to enable SNMPv3 the following fields must be set:
SNMPv3
Description
Security Name:
SNMPv3 is enabled (identical to the username)
Access Rights:
Equivalent to the Read/Write Communities in SNMPv2
Authentication Protocol:
Authentication (MD5 or SHA Hash)
Privacy Protocol:
Encryption (DES or AES Algorithm)
