HTTP/HTTPS
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00
45 / 178
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
8.2.1 LOGIN and LOGOUT as User
All of the modules data can be read without being logged on as a special user. However, the
configuration and modification of settings and data can only be carried out by an authorised
user! Two types of user are defined:
•
"
master
" user (default password on delivery: <
master
> )
•
"
device
" user (default password on delivery: <
device
> )
Differentiation is made between
upper and lower case
characters in the
password. Alphanumeric characters and the following symbols can be
used:
[ ] ( ) * - _ ! $ % & / = ?
The password must be between 6 and 20 characters long and contain at
least one uppercase letter, one lowercase letter and one digit!
The password should be changed after the first login for security reasons.
The following screen should be visible after logging in as a "master" user:
Click on the
Logout
button to log out.
The WebGUI is equipped with a session management. If the user does not conduct a logout,
the logout is automatically made after 10 minutes of inactivity (idle time).
After successful login, depending on the access level (device or master user), changes can
be made to the configuration and saved.
Users logged in as “
master”
have all access rights to the Time Server 8030HEPTA/GPS.
