hopf Elektronik GmbH 8030HEPTA/GPS Technical Manual Download

Page: 107 / 178

HTTP/HTTPS

GUI

–

ROWSER

ONFIGURATION

NTERFACE

8030HEPTA/GPS GPS - NTP Time Server with 2x 10/100/1000 MBit LAN Interface - V04.00

107 / 178

hopf

Elektronik GmbH

Nottebohmstr. 41

• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]

8.3.6.11 Downloading Configuration Files / SNMP MIB

In order to be able to download certain configuration files via the web interface, it is necessary
to be logged on as a

"master"

user.

The loaded file

System Configuration

from the module is only used for

support purposes and cannot be reloaded for adjusting the settings in the
Time Server 8030HEPTA/GPS.

For the download of the file

System Configuration

the following process

is mandatory:

1. Pressing the button

SAVE

2. Pressing the button

Refresh System Configuration

3. After approximately 30 seconds, the files are available for the

download

4. Press on the link Configuration Files to update the web site
5. Perform the download of the file

The "private

hopf

enterprise MIB" is also available via the WebGUI in this area.

Summary of Contents for 8030HEPTA/GPS



















































































































































































Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands

hopf Elektronik GmbH 8030HEPTA/GPS, Technical Manual

Search results

Summary of Contents for 8030HEPTA/GPS

Reviews:

Related manuals for 8030HEPTA/GPS

Brands by name

Popular brands