INSTRUCTION MANUAL
www.hopetech.com
Light Source:
8 x Cree XP-G2 LEDs
Light Output:
2200 measured lumens (3000 generated lumens)
Beam:
Custom optic: 4 x spot (+/- 5.5°); 2 x diffused (+/- 6.5°)
2 x elliptical (+/- 17° x +/- 7°)
Mounting:
QR bayonet style
handlebar, helmet or head mount
Battery:
7.4v rechargeable Li-Ion battery
Nom. capacity 7800mAh, Min. capacity 7650mAh
Charge Time:
7800mAh - 9hrs
Weight:
665g (with 7800mAh battery and handlebar mount)
Power Levels:
6 (two sequences of 3), including flash
Burn Time:
2:00 hrs - 35:00 hrs (7800mAh)
www.hopetech.com
RECHARGEABLE LI-ION LED LIGHTING SYSTEM
1. R8 lamp unit
2. Rechargeable Li-Ion ES battery pack
3. Battery strap
4. QR bayonet handlebar clamp
5. 31.8 handlebar shim
6. 25.4 handlebar spacer
7. Helmet mount
8. QR bayonet mount adapter
9. Battery charger
10. Extension cable
11. Head Harness
4
6
7
8
11
10
9
5
3
1
2
CONTENTS
HLNR81478 - Standard
WARRANTY
All Hope Technology lighting systems are covered for one year from original date of
purchase against manufacturer defects in material and workmanship. Proof of purchase
is required. Product must be returned to Hope Technology to process any warranty
claim. This warranty does not cover any damage caused through mis-use or failing to
comply by the recommendations given in this manual. This warranty does not affect
your statutory rights.
DISPOSAL
When the equipment has reached the end of its life please dispose of the
components in accordance with your local waste regulations. Lamps and
batteries should be recycled where possible and not disposed of with
regular waste.
Li-Ion
IMPORTANT INFORMATION
We strongly advise you read the following recommendations in order to prevent
injury or damage to the lighting system.
WARNING
· This lighting system will withstand harsh wet weather conditions. However, it is
not designed to be submersed in water. If the light is fitted to a bike, please ensure
that the light unit and battery pack are removed from the bike before washing -
particularly if using a high pressure jet wash.
· Do not look directly at the beam, permanent eye damage could result. Consider
other people when mounting the light on the head to avoid dazzling them.
· Keep this light away from children.
· This light unit can get hot when in use in maximum power mode. This is normal
and should not be mistaken as a malfunction. Please use with caution.
· Unlike unregulated LED lighting systems, this light unit will shut down suddenly
after a period of time in low battery mode without any dimming of the light. Please
bear this in mind when using at night.
· Only connect the lamp unit to a compatible Hope Vision 7.4 V battery pack. Any
attempt to use or charge another battery pack may result in explosion and serious
injury.
· Do not short-circuit the battery terminals. This causes the battery to overheat and
could result in fire or explosion.
· The battery charger is designed for indoor use only and should not come into
contact with water.
· The battery charger contains dangerous voltages and the cover should not be
removed. Any attempt to open the charger will invalidate the warranty.
· This light unit conforms to the requirements of EC directive 2004/108/EC for
electromagnetic compatibility.
If you find that the power connectors are becoming difficult to separate, we advise
using a small amount of silicone lubricant on the battery connector to ease fitting.
There are no serviceable parts inside either the light unit or battery pack. Please do
not attempt to disassemble the units, as this will invalidate the warranty. If you
find that there is a problem with the functioning of the lighting system please first
check that the battery pack is fully charged (see Charging the Battery Pack section).
If the light still fails to function please contact Hope Technology.
MAINTENANCE