INSTRUCTION MANUAL
www.hopetech.com
Light Source:
8 x Cree XP-G2 LEDs
Light Output:
2200 measured lumens
3000 generated lumens
Beam:
Custom optic:
4 x spot (+/- 5.5
°
)
2 x diffused (+/- 6.5
°
)
2 x elliptical (+/- 17
°
x +/- 7
°
)
Mounting:
QR bayonet style helmet mount or head harness
Battery:
7.4v rechargeable Li-Ion ES battery with fuel gauge
Nominal capacity 7800mAh
Minimum capacity 7650mAh
Charge Time:
7800mAh - 9hrs
Weight:
660g (with 7800mAh battery and helmet mount)
Power Levels:
6 (two sequences of 3), including flash
Burn Time:
2:00 hrs - 35:00 hrs (7800mAh)
WARRANTY
All Hope Technology lighting systems are covered for one year from original date of
purchase against manufacturer defects in material and workmanship. Proof of
purchase is required. Product must be returned to Hope Technology to process any
warranty claim. This warranty does not cover any damage caused through mis-use
or failing to comply by the recommendations given in this manual. This warranty
does not affect your statutory rights.
IMPORTANT INFORMATION
DISPOSAL
When the equipment has reached the end of its life please dispose
of the components in accordance with your local waste regulations.
Lamps and batteries should be recycled where possible and not
disposed of with regular waste.
Li-Ion
We strongly advise you read the following recommendations in order to prevent
injury or damage to the lighting system.
WARNING
· This lighting system will withstand harsh wet weather conditions.
However, it is not designed to be submersed in water.
· Do not look directly at the beam, permanent eye damage could result.
Consider other people when mounting the light on the head to avoid
dazzling them.
· Keep this light away from children.
· This light unit can get hot when in use in maximum power mode. This is
normal and should not be mistaken as a malfunction. Please use with
caution.
· Unlike unregulated LED lighting systems, this light unit will shut down
suddenly after a period of time in low battery mode without any dimming of
the light. Please bear this in mind when using at night.
· Only connect the lamp unit to a compatible Hope Vision 7.4 V battery
pack. Any attempt to use or charge another battery pack may result in
explosion and serious injury.
· Do not short-circuit the battery terminals. This causes the battery to
overheat and could result in fire or explosion.
· The battery charger is designed for indoor use only and should not come
into contact with water.
· The battery charger contains dangerous voltages and the cover should
not be removed. Any attempt to open the charger will invalidate the
warranty.
· This light unit conforms to the requirements of EC directive 2004/108/EC
for electromagnetic compatibility.
www.hopetech.com
RECHARGEABLE LI-ION LED LIGHTING SYSTEM
1. R8 lamp unit
2. Rechargeable Li-Ion ES battery pack
3. Helmet mount
4. QR bayonet mount adapter
5. Head Harness
6. Extension cable
7. Battery strap
8. Battery charger
3
4
5
6
8
7
1
2
CONTENTS
LI-ION ES BATTERY PACK
75% - 100%
50% - 75%
25% - 50%
5% - 25%
Fully discharged.
Charge immediately
The ES (Energy Status) battery pack features a 5 stage fuel gauge. Press and hold
the ‘TEST’ button to activate the LED display. This gives a visual indication of the
remaining capacity within the battery cells.