Hope Electronics Technology
Manual
Edition
V2.0
46
2. Press the direction key to move the cursor to the automatic storage function.
Press the
[ENTER]
key to turn ON or OFF the automatic storage function, and press the left and
right keys to switch OFF, ON. Press
[ENTER]
again to complete. Press
[ESC]
to return to the
measurement interface.
The instrument retains and stores measurement values automatically when the auto-memory
function is used together with auto-hold function.
6.4 Auto Power Save Function
The auto power save function can be used to reduce power consumption of the instrument. The
instrument is turned off automatically if any of the following conditions continues for
approximately 10 minutes with no key operation:
•
[−−−−] is displayed as a resistance value.
•
Data is being retained. (Measurement is suspended.)
•
A state other than measurement state. (Any of the setup screens or the data readout screen is
displayed.)
•
After completion of communication.
