Hope Electronics Technology
Manual
Edition
V2.0
45
The average function can be used when measure resistance values.
The average function is used to change the display update rate of the test value.
When the average function is not used, select "OFF".
6.2 Auto-hold Function
This function automatically recognizes the stability of measurement values and retains them.
Set auto hold function
1. Press
[SYS]
on the test page. Switch to the system Settings interface.
Press the
[ENTER]
key to select whether to turn ON the auto save function, and press the left
and right keys to switch OFF, ON. Press
[ENTER]
again to complete. Press
[ESC]
to return to the
measurement interface.
•
When [−−−−]is displayed, data is not retained automatically.
•
The instrument retains and stores measurement values automatically when the auto-memory
function is used together with this function.
6.3 Auto-memory Function
This function automatically stores measurement values in memory immediately after they are
retained.
Set up automatic storage
1. Press
[SYS]
on the test page. Switch to the system Settings interface.
