Hope Electronics Technology
Manual
Edition
V2.0
39
2. Use the key
/
to select the memory number to be read out. Use the key
/
to
locate the memory number The measurement values for the selected memory number are
displayed.
Press the DATE key to check the date and time when the data was stored.
The comparator result for the data being read out is also displayed.
You cannot select the number of the memory location in which no data is stored.
If no data has been stored, [−−−−] is displayed in the memory number display
area and the instrument returns to the measurement screen.
For data measured using the optional model PT1000 Clip Type Lead with Temperature Sensor,
the temperature is also displayed.
5.5 Clearing Stored Data
5.5.1 Clearing a group of data
1. Press [FILE] on the test page. Switch to the file reading interface.
