Installation Instructions
8
UM17E User Manual, June 2010
Step 2: Bench-test Configuration
Make sure everything works before installing into the production environment�
TIP!
Install Cable Connections
The cable ports are located on the rear of the monitor� Refer to the following instructions to
connect power, video, and touchscreen (if applicable) to your monitor�
Video Connection
The HIS-UM17 supports analog video� Connect one end of the VGA video cable to the HD-15
input port on the rear of the monitor� Connect the other end to the video output port on the host
computer�
Power Connection
The HIS-UM17 is powered by 100 to 240 VAC, 0�6/0�3 A, 60/50 Hz�
Connect the AC power cable to the power input port on the rear of the monitor� Connect the other
end into a nearby outlet�
If using a KVM extender, please refer to the installation instructions included with the
KVM extender module� It is particularly important to bench-test the full configuration
prior to final installation� This will help to identify and troubleshoot any system issues
while configuration changes may still be easily made�