10
09
Scan the barcodes directly, the decoded data will be transferred to the receiver and
displayed on the PC or your host. A prompt sound will be heard if registration failed.
Inventory mode allows you to use the scanner without any connection to a host. The
scanned codes will be stored in the built-in memory of the scanner. At the end of your
work, scan the “Transfer Data” code to transfer the data to your PC or other host.
Transfer Speed Setting (Inventory Mode Only)
Scan “Total Number of Data Entry” to check how many data is decoded
After you transfer the data in inventory mode, scan “Clear Data” to clear the inventory data.
Set Sleep Time
Normal Mode
Clear Data
Fast
Standard
Slow
Sleep Time 20 Seconds
Sleep Time 10 Seconds
Inventory Mode
Transfer Data
Total Number of Data Entry
Pair with phone, pad, or other devices.
Pair with your laptops or use the cable to connect the Bluetooth scanner.
Pair with PC without Bluetooth, you need to use a Bluetooth receiver or the wired mode to
connect with a PC without Bluetooth functionality.
3. Pair with different hosts
Turn on Bluetooth on the host device, scan the Bluetooth barcode to pair.
Set Your Barcode Scanner
Normal Mode (*)
Inventory Mode