How to assemble the recliner back
1.When assembling your recliner, please lay down the recliner carefully on soft surface.
Place the bracket into sleeve and press top of back down firmly to lock into place.
2.To remove the back, use screwdrive to rise up the sleeve on both side
then lift the back from the base
How to use memory button
3. USB charging port: The output Voltage on the USB port is 5V and the output current is 1A.
ASSEMBLY INSTRUCTION
Item#:SS460-P3/SS460-P2/SS460-PWR- Recliner
1. Memory function: When the sofa being adjusted to a comfortable position you fell, press the
memory button for 3s till the 4-button blue lights (as picture 2) flashing for 3 times. Then the
comfortable position is recorded. Next time, by pushing the memory button one time , the sofa
will go to the comfortable position that you set before ,if you want to stop the memory function
right now, just press any buttons on the product. We set the memory function which only can
open but can not close the seat and head motor to make sure safety. The memory will not work
if any motor stop position is over the position which recorded before .
2 HOME function: by pushing and hold the HOME button, the sofa will be all closed, if you
release the HOME button, the sofa will stop close.
PLEASE DO NOT USE A MULTI-BOARD OR MORE THAN TWO USB DEVICES AT ONE
TIME, OR DAMAGE COULD OCCUR.
