1/2
ASSEMBLY INSTRUCTION
Item#:1618-75019-DKW Upholstered Dining Bench
** Please make sure you have all parts indicated below prior to assembly.
Assembly Steps:
Please follow numbers on one chair and letters on the other chair during assembly.
1.
Place chair back on a clean surface.
2.
Tighten back frame rail to chair back legs (G) and assemble back legs (G) to the corner blocks of
seat frame(I) by using 4 bolts (E), 4 lock washers (C) and 4 flat washers (D).
3.
Assemble front legs (F) to corner blocks of seat frame (I), using 4 bolts (E), 4 lock washers (C) and
4 flat washers (D).
4.
Screw front and back center leg(H) on center rail using 4 bolt (B), 4 lock washer (C) and 4 flat
washer (D).
5.
Make sure the chair is level and then tighten all bolts completely by using Allen wrench (A).
6.
Turn the chair upright. Level the chair following the “chair leveling instruction” as below.
Diagram 1
