1/2
ASSEMBLY INSTRUCTION
Item#: 1652-75410-MWD Upholstered Side Chair
** Please make sure you have all parts indicated below prior to assembly.
Diagram 2
Diagram 1
Assembly Steps:
There are two K/D chairs in one box. Please follow numbers on one chair and letters on the other
chair during assembly.
1. Place chair back (F) on a clean surface.
2. Tighten seat frame (G) to chair back (F) by using bolt (C), lock washer (B) and flat washer
(A) at the center location. (See diagram 2). Then, tighten the corners of seat frame (G) to
chair back (F) by using 4 bolts (E), 4 lock washers (B) and 4 flat washers (A). (See
diagram 1)
3. Assemble two front legs with front corner blocks of seat frame (G), using 4 bolts (C), 4 lock
washers (B) and 4 flat washers (A). Tighten all bolts by hand. (See diagram 2)
