Step 1:Attach the tube join support by sliding in tube into legs,
make sure height of the 2 legs are the same.
Step 2:Attach the second join support in front of the tube join
support using provided allen wrench (C) with bolt (A).
Step 3:Assembly the join support from below, using provided
allen wrench (C) with bolt (B).
Step 4:Attach the table top, using screw driver
with screws (D)
,
before screwing the top table,place the table top above 2 side panels,
make sure table edges flat
with side panels. Adjust
table height up by
pushing up button until have enough space to screw the table top.
Step 5:Adjust table height by pushing up or down button on right
front side of table top
Step 6: Attach the "U'' bracket (E) using screws (D) with screw driver,
right in the middle of join support bar.
Step 7:Adjust Leveler if needed to level case on uneven floor.
STEP 1
STEP 1
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
