1/2
ASSEMBLY INSTRUCTION
Item#:1618-25350-DKW Deconstructed Counter Stool
** Please make sure you have all parts indicated below prior to assembly.
Assembly Steps:
Please follow numbers on front legs and letters on chair during assembly.
1.
Place chair back on a clean surface.
2.
Tighten seat frame (I) to chair back(G) and assemble back legs to the corner blocks of seat frame(I)
by using 4 bolts (C), 4 lock washers (B) and 4 flat washers (A).
3.
Assemble front left and right legs (F) according to the numbers to corner blocks of seat frame (I),
using 2 bolts (C), 2 lock washers (B) and 2 flat washers (A).
4.
Assemble back legs to corner blocks of seat frame (I), using 2 bolts (F), 2 lock washers (B) and 2
flat washers (A)
5.
Screw the rail (H) on two sides and footrest (J) on front to legs.
6.
Tighten all bolts and screws, turn the chair upright.
7.
Level the chair following the “chair leveling instruction” as below.
8.
Make sure the chair is level and then tighten all bolts completely by using allen wrench (D).
Diagram 1
