UVAHAND LED
6
# 073350DE-EN b
2.
Safety information
2.1.
General notes
A knowledge of all basic safety regulations is essential to ensure safe han-
dling and fault-free operation of the UVAHAND LED.
These Operating Instructions contain the most important notes for operating
the unit in a safe manner.
The Operating Instructions, especially the safety notes, must be observed by
everyone that works with the unit.
In addition, all rules and regulations on accident prevention that apply to the
usage area must also be observed.
The operator must check at regular intervals that the staff are working with a
safety-conscious attitude.
Under workplace health and safety regulations, operators are required to
carry out a suitable and sufficient assessment of the risks arising from the
use of the UVAHAND LED.
The assessment must ensure that adequate control measurements are
maintained in order to eliminate or minimise these risks. You can use the in-
formation contained in these Operating Instructions when making the risk
assessment.
2.2.
Intended purpose of use
The UVAHAND LED is a high-intensity, mobile UV LED lamp for the irradia-
tion of surfaces (see also section Applications, p. 5).
Any other use or use above and beyond these terms is defined as inappro-
priate and is thus dangerous.
The UVAHAND LED must not be used for medical or therapeutic purposes,
for skin-tanning or in any other medical equipment.
The operator may only operate the equipment as stipulated by the operating
instructions in this manual.
The user is obliged to carry out the prescribed service and maintenance
work and to replace components which are subject to wear.
There are International and UK guidelines for restriction of occupational UV expo-
sures.
Useful references:
ICNIRP Guidelines on limiting exposure (
NRPB Advice on protection (www.nrpb.org)
General notes
Intended use
