XNX Universal Transmitter
Introduction
14
Product Overview
The transmitter is comprised of these main parts:
Figure 2. XNX exploded view
Enclosure
Available in either
Stainless Steel or
Aluminum, with 3/4” NPT
(UL/CSA or UL/ INMETRO) or M25 (ATEX/IECEx only) threaded
cable/conduit ports, the transmitter enclosure is explosion-
proof and suitable for use in -40°F to +149°F (-40°C to +65°C)
operating conditions. A 5-coat marine finishing process provides
the highest degree of corrosion protection. For more information
on performance specifications, see the
section.
The enclosure is equipped with up to five threaded cable/conduit
ports providing functional and flexible configurations based on
sensor and option choices. See
Cable/conduit port assingments
for port assignments and restrictions.
Stopping plugs (PN# 1226-0257 or 1226-0258) have been
provided to seal unused cable/conduit ports and have been
Agency evaluated/approved for use with the XNX enclosure only.
The number of stopping plugs varies among available
configurations.
Caution:
The stopping plugs are for use only with the XNX transmitter. Do not use them
with any other device.
CAUTION
!
Mounting lugs integral to the enclosure allow easy installation
on a flat surface or 2”-6” (50-150 mm) diameter pipe with the
optional Pipe Mount Kit or to ceilings with the Ceiling Mount
Bracket Kit.
Summary of Contents for XNX-AM Series
