Honeywell VX6, Reference Manual, Page: 37 / 356

Bluetooth 17
E-EQ-VX6RG-F VX6 Reference Guide
Bluetooth Devices
Assumption
: The System Administrator has Discovered and Paired targeted Bluetooth devices
for each VX6. The System Administrator has also enabled / disabled Bluetooth
settings and assigned a Computer Friendly Name for each VX6. See
Chapter 3
System Configuration, Bluetooth control panel applet
and supported Bluetooth
printers and scanners.
The Bluetooth taskbar Icon state and Bluetooth LED states change as Bluetooth devices are
discovered, pair, connect and disconnect. There may be audible or visual signals as paired devices
re-connect with the VX6. Only LXE printers or scanners are recognized and displayed in the
Bluetooth panel. All other Bluetooth devices are ignored.
Taskbar
Icon
Legend
Bluetooth module is connected to one or more of the targeted Bluetooth
device(s).
VX6 is not connected to any Bluetooth device.
VX6 is ready to connect with any Bluetooth device.
VX6 is out of range of all paired Bluetooth device(s). Connection is
inactive.
Note: When an active paired dev ice enters Suspend Mode, is turned Off or leaves the VX6
Bluetooth scan range, the Bluetooth connection between the paired device and the VX6 is
lost. There may be audible or visual signals as paired devices disconnect from the VX6.
See
Accessories
for supported Bluetooth printers and scanners.
AppLock, if installed, does not stop the end-user from using Bluetooth applications, nor does it
stop authorized Bluetooth-enabled devices from pairing with the VX6 while AppLock is in
control. See
Chapter 6 – AppLock
for more information.
See Also:
Chapter 3 – System Configuration
, section titled
Bluetooth
.