manualshive.com logo in svg

Honeywell VX6, Reference Manual, Page: 164 / 356

Share
Download
Honeywell VX6 Reference Manual Download Page 164

144 

Wavelink Avalanche Enabler Configuration 

VX6 Reference Guide 

E-EQ-VX6RG-F 

Scan Config 

Note:   Scan Config functionality is a standard option of the Wavelink Avalanche System but is 

not currently supported by LXE on Windows CE. 

 

Figure 3-39  Scan Config Option 

Display 

 

Figure 3-40  Window Display Options 

Update Window Display 

The user interface for the Enabler can be configured to dynamically change based on the status of 
the connection with the Mobile Device Server. 

At startup 

Half screen, Hidden or Full screen. Default is Half screen. 

On connect 

As is, Half screen, full screen, Locked full screen. Default is As is. 

Normal   

Half screen, Hidden or As is. Default is As is. 

Summary of Contents for VX6





































































































































































































































































































































































Reviews:

No comments