Home
/
Honeywell
/
VX3Plus
/
Reference Manual

Honeywell VX3Plus, Reference Manual, Page: 266 / 282

Share

Page: 266 / 282

Honeywell VX3Plus Reference Manual Download Page 266

Click the

Download certificate

link.

Click

Save

to download and store the user certificate to the PC. Make sure to keep track of the name and location of the

certificate. The private key file is also downloaded and saved during this process.

Be sure use the same name for the certificate file as was used for the private key file. For example, it the private key was
saved as USER1.PVK then the certificate file created must be given the same name, for example, USER1.CER.

the user certificate.

Installing a User Certificate

Copy the certificate and private key files to the VX3Plus. Import the certificate by navigating to

Start > Control Panel >

Certificates

.

Select

My Certificates

from the pull down list.

5-46

«
...
264
265
266
267
268
...
»

Summary of Contents for VX3Plus



























































































































































































































































































Reviews:

No comments