Honeywell VX3Plus, Reference Manual, Page: 237 / 282

Parameter Default Function
TX Diversity
BG: On
A: Main Only
How to handle antenna diversity when transmitting packets to the Access
Point.
Options are:
Main only (use the main antenna only)
Aux only (use the auxiliary antenna only)
On (use diversity or both antennas).
The options for the TX Diversity parameter should be set, based on the
antenna configuration, as follows:
Contact your representative if you have questions about the antenna(s)
installed on your VX3Plus.
RX Diversity
BG: On-Start on
Main
A: Main Only
How to handle antenna diversity when receiving packets from the Access
Point.
Options are:
Main Only (use the main antenna only)
Aux Only (use the auxiliary antenna only)
On-start on Main (on startup, use the main antenna)
On-start on Aux (on startup, use the auxiliary antenna).
The options for the RX Diversity parameter should be set, based on the
antenna configuration, as follows:
Contact your representative if you have questions about the antenna(s)
installed on your VX3Plus.
Frag Thresh 2346
If the packet size (in bytes) exceeds the specified number of bytes set in the
fragment threshold, the packet is fragmented (sent as several pieces instead
of as one block). Use a low setting in areas where communication is poor or
where there is a great deal of wireless interference.
Options are: Any number between 256 bytes and 2346 bytes.
5-17