Honeywell VX3Plus, Reference Manual, Page: 146 / 282

Command
Command Function
options Specifies the option to perform. See the table below for the option parameters and values.
load Loads and starts Netlog.
start Starts the Netlog process of logging the network traffic.
stop Stops Netlog from logging network traffic.
unload Unloads Netlog.
Options
Options Function
pkt_size in
bytes Specifies the maximum packet size captured in bytes. This option should only be run after you have called load
and stop . Default is 5000.
cap_size in
bytes Specifies the maximum size of Netlog0.cap or Netlog1.cap in bytes. This option should only be run after you
have called
load and stop . Default is 500,000.
.cap file
Specifies the name of the file to which network traffic information is saved. This option should only be run after
you have called
load and stop . Default is \netlog.
Run cmd
Performs the command selected. For example, to run Netlog and modify the packet size do the following:
Select load from the Commands list and click the Run cmd button.
Select stop from the Commands list and click the Run cmd button.
Select options from the Commands list, enter the new packet size in the Options list and click the Run cmd button.
NDISLog
NDISLog creates a .TXT file that can be viewed with any text editor program that supports .TXT files.
3-106