Honeywell VX3Plus Reference Manual Download Page 126

Page: 126 / 282

Input Panel

Start > Settings > Control Panel > Input Panel

Set the current VX3Plus keys and data input method.

Factory Default Settings

Input Method

Keyboard

Allow applications to change

input panel state

Enabled

Options button

Keys

Small keys

Use gestures

Disabled

Use this panel to make the Input Panel (on-screen keyboard) or the physical keypad primarily available when entering data on
any screen.

Selecting Keyboard enables both.

Tap the Options button to set the size of the keys displayed on-screen and whether Transcriber gestures are enabled or
disabled.

Note:

Contact your

representative

for language packs availability.

3-86

Summary of Contents for VX3Plus



























































































































































































































































































Search results

Summary of Contents for VX3Plus

Reviews:

Honeywell VX3Plus, Reference Manual, Page: 126 / 282

Search results

Summary of Contents for VX3Plus

Reviews: