Honeywell VX3Plus Reference Manual Download Page 120

Page: 120 / 282

Certificates

Start > Settings > Control Panel > Certificates

Manage digital certificates used for secure communication.

Note:

Digital certificates are date sensitive. If the date on the VX3Plus is incorrect, wireless authentication

will fail.

The Certificates stores lists the certificates trusted by the VX3Plus mobile device user.

These values may change based on the type of network security resident in the client, access point or the host system.

Tap the

Import

button to import a digital certificate file.

Tap the

View

button to view a highlighted digital certificate.

Tap the

Remove

button to remove highlighted certificate files.

Tap the ? button and follow the instructions in the Windows CE Help file when working with trusted authorities and digital
certificates.

3-80

Summary of Contents for VX3Plus



























































































































































































































































































Search results

Summary of Contents for VX3Plus

Reviews:

Honeywell VX3Plus, Reference Manual, Page: 120 / 282

Search results

Summary of Contents for VX3Plus

Reviews: