Honeywell VX3Plus, Reference Manual, Page: 118 / 282

Using OPP
Pairing with an OPP Device
Prerequisites
l
A remote device, such as a mobile phone, that supports OPP.
l
OPP is enabled on the VX3Plus.
How To
1. Place the remote device in discovery or visible mode.
2. Initiate discovery on the VX3Plus by tapping the Discover button on the OPP Send tab.
3. The VX3Plus discovers the remote device.
4. The VX3Plus attempts to send a file to the remote device.
5. The remote device prompts the user for a 4 digit PIN.
6. User enters the PIN.
7. The VX3Plus prompts the user for a 4 digit PIN.
8. User must enter the same PIN code as entered on the remote device.
9. The VX3Plus now pairs with the remote device.
Remote Device Pushes File to VX3Plus
This section assumes that a device supporting OPP is paired with the VX3Plus.
If a duplicate filename is received, LXEZ Pairing writes the file in the specified location, with an incremental number appended
to the file name. For example, if a file named
file.jpg is pushed to the VX3Plus and that filename already exists in the Inbox,
LXEZ Pairing saves the new file as file001.jpg . If the same file is pushed again, it is saved as file002.jpg .
There are several scenarios based on configuration options on the OPP Setup tab.
Notifications enabled, VX3Plus is Write Capable
1. The OPP client initiates a connection to the VX3Plus by selecting a file to push to the VX3Plus.
2. The VX3Plus user is notified that a File Push request has been issued from a remote device.
3. The VX3Plus user is prompted to accept or reject the incoming request.
4. If the user accepts the request:
a. The file is pushed to the VX3Plus.
b. LXEZ Pairing notifies the user that a file has been received.
c. The connection is closed by the remote device (OPP client).
5. If the user rejects the request:
a. The file is not pushed to the VX3Plus.
b. The connection is closed.
Notifications enabled, VX3Plus is not Write Capable
3-78