manualshive.com logo in svg

Honeywell VisionPRO 8000 Series, Product Data

Share
Download
Honeywell VisionPRO 8000 Series Product Data Download Page 55

VISIONPRO® 8000 SMART THERMOSTAT

55

33-00096—04

HEAT PUMP AND BACKUP HEAT OPERATION

Heat pump with outdoor temperature lockouts

Outdoor temperature lockouts are optional. See Installer Setup options (ISU 312).

Alert Light - General

An alert light is located in the lower right corner of the 
thermostat. See Fig. 28 and 29. This light turns red when 
an alert is active or the system is set to the Em. Heat mode.

Alert Light - Heat Pump Systems

When the L terminal is wired to a compressor monitor and 
it receives 24 volts, the alert light on the thermostat will 
turn red to indicate a system problem. The thermostat 
monitors 24 volts on the L terminal in Heat, Cool and Auto 
modes.

Alert Light - Emergency Heat Indication

When the thermostat is setup for a Heat Pump with an 
Auxiliary Heat source, the alert light will turn red when the 
user sets the system to the Em. Heat mode. It is normal for 
the alert light to turn red in the Em. Heat mode to remind 
the user that they are currently operating their Emergency 
Heat and the Heat Pump is locked out.

Geothermal Radiant Heat

The thermostat can be setup to control Geothermal 
Radiant Heat, Geothermal Forced Air Heat and Backup 
Heat, all from one thermostat. The thermostat stages the 
equipment starting with the Geothermal Radiant Heat 
followed by Geothermal Forced Air Heat and then Backup 

Heat as needed to maintain the desired temperature. The 
thermostat allows you to set differential temperature 
settings between each stage if you want the equipment to 
stage a certain way (see ISU 303 to ISU 309, page 16). For 
additional wiring diagrams, see “Wiring” beginning on 
page 84.

NOTE:

To turn off Radiant Heat during the shoulder sea-
sons, install an outdoor reset control and connect 
to the Radiant Heat or switch the thermostat to 
Emergency Heat mode.

Electric Backup Heat (Backup Heat 
Allowed to Run with Heat Pump)

HEAT MODE

The thermostat turns on Backup Heat only when the indoor 
temperature drops to the selected Backup Heat Droop 
setting or the Backup Heat Upstage Timer expires 
(whichever occurs first). Geothermal Radiant Heat and 
Geothermal Forced Air Heat stay on when the Backup Heat 
turns on.

EMERGENCY HEAT MODE

The thermostat turns on the Backup Heat to maintain the 
desired temperature setting. Geothermal Radiant Heat and 
Geothermal Forced Air Heat are not used.

Summary of Contents for VisionPRO 8000 Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands