VISIONPRO® 8000 SMART THERMOSTAT
39
33-00096—04
MOUNTING C7089U1006 WIRED OUTDOOR
TEMPERATURE SENSOR
Do
not
mount the sensor:
• in direct sunlight.
• where hot or cold air blows on the sensor. Discharge line
from an outdoor compressor unit, vent or fan causes
inaccurate temperature readings.
• where snow, ice or debris can cover it.
Use the following steps to mount the sensor:
1.
Remove the sensor from the mounting clip.
2.
Mark the area on the location selected for mounting
the sensor mounting clip.
3.
Mount the clip.
4.
See “Wiring C7089U1006 Outdoor Sensor” on
page 88.
Fig. 27. Typical locations for C7089U1006 Outdoor
Sensor.
OPERATION
Fig. 28. Quick reference to residential display.
NOTE:
The screen lights when you press any button. After you complete your changes, the screen stays lit for 45 seconds.
Depending on how your thermostat was installed, the screen light may always be on.
M7514
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to
set a program schedule.
Current status. Shows system mode (heat/cool),
outdoor temperature (with optional outdoor
sensor or Wi-Fi
®
connection) and humidity
(requires Wi-Fi connection).
Current schedule. Touch an arrow to change
temperature setting and select a Temporary or
Permanent Hold.
Indoor conditions. Shows indoor temperature
and humidity.
Current time. Touch to set the current time/date.
Alert Light. On when alert message is active or
system is set to EmHeat.
