VISIONPRO® 8000 SMART THERMOSTAT
37
33-00096—04
Connect to a hidden Wi-Fi
®
network
1.
Touch MENU, then Wi-Fi Setup.
2.
Touch Other, then Select.
3.
When prompted, press the screen to edit the network
name.
4.
Enter the network name.
Press the
or
buttons to change the letter or
number. Press the
button to move to the next
character, or the
button to move to the previous
character. Use the
or
buttons at the bottom to
change letter case. Press Done when complete.
5.
Select the appropriate network security setting, then
press Select.
6.
Enter the Wi-Fi network password as explained above
in “Connecting to Wi-Fi Network”, step 6.
Unsuccessful Wi-Fi connection
If you are unsuccessful in connecting the thermostat to the
Wi-Fi network, you will see a Connection Failed screen.
Press
button for other tips about this failed connection.
Here are three specific reasons the connection might be
unsuccessful.
For all Connection Failed screens, pressing Done will
return to the Menu screen.
Invalid Password
The password you entered is invalid. Check that you have
the right password and try again.
No IP Address
The thermostat was unable to obtain an IP address from
the router. Verify the router is correctly set up to
automatically assign IP addresses. This connection can
take several minutes. If there is still no connection, remove
the thermostat from the wallplate for 10 seconds, then
snap it back into place.
No Internet Link
The thermostat connected to the Wi-Fi network but was
unable to establish a connection to the internet. Check the
router settings and try again. Make sure the Ethernet cable
is plugged into the router and try rebooting the router if
necessary.
DoaIol Inrol Madorl
Wi-Fi Setup
Installer Options
M35352
M35353
WirelessNetwork
Other...
M35354
Enter Network Name
Press Here to Edit
M35346
Delete Space
AC
M35355
SSID Security
Open Network
