1
M11377
1
3-7/8 IN. x 3-7/8 IN. DECORATOR COVER PLATE ALSO AVAILABLE.
5-3/4 IN. x 5-3/4 IN.
DECORATOR
COVER PLATE
SYSTEM
Cool Off Heat
Auto On
FA
N
UP
THERMOSTAT
COVER
WALLPLATE
VERTICAL
WIRING BOX
BRACKET
X-XX UL
INSTALLATION INSTRUCTIONS
®U.S. Registered Trademark
Copyright © 1997 Honeywell Inc. • • All Rights Reserved
209632 Bracket
209634A,B and 209635A,B Cover Plates
APPLICATION
The TRADELINE® 209632 Bracket, purchased separately, can
be used to mount the cover plate to a 2 in. x 4 in. vertical or
horizontal outlet box.
The TRADELINE® 209634A,B and 209635A,B Cover Plates are
designed for use with the T8400 and T8401 Electronic Thermo-
stats and can be used to cover marks left by old thermostats. The
Cover Plates are available in two decorator sizes and colors. See
Table 1 for specifications.
Table 1. Cover Plate Specifications.
CAUTION
Can cause electrical shock or equipment damage.
Disconnect power supply.
Mounting Bracket to Wiring Box
The bracket is designed to mount the cover plate to a 2 in. x 4 in.
vertical or horizontal wiring box.
Mount the bracket as follows (see Fig. 1):
1. Remove the mounting screws from the wiring box.
2. Position the bracket over the wiring box.
3. Insert the screws through the bracket and wiring box
mounting holes and tighten.
4. Place the cover plate over the bracket.
5. Position the wallplate over the cover plate.
6. Insert the mounting screws (provided with
the thermostat) through the mounting
holes on the wallplate and the
cover plate and tighten.
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow them
could damage the product or cause a hazardous
condition.
2. Check the ratings given in the instructions and on the
product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service
technician.
4. After installation is complete, check out
product operation as provided in
these instructions.
Fig. 1. Mount thermostat, wallplate, cover plate and bracket to wiring box.
69-1094-1
Part
Number
Dimensions
Color
209634A
3-7/8 in. (98 mm) x 3-7/8 in. (98 mm)
Taupe
209634B
3-7/8 in. (98 mm) x 3-7/8 in. (98 mm)
Premier
White
®
209635A
5-3/4 in. (146 mm) x 5-3/4 in. (146 mm)
Taupe
209635B
5-3/4 in. (146 mm) x 5-3/4 in. (146 mm)
Premier
White
®