Honeywell Thor VX9 User Manual Download

Page: 128 / 198

5 - 66

Click the

Save

button and save the certificate. Make sure to keep track of the name and location of the certificate.

The certificate is now ready to install on the Thor VX9.

Install a Root CA Certificate

Note: This section is only if the Windows certificate store is used. If the certificate store is not used, copy the certificate to

the C:\Program Files\Summit\certs folder or other path specified in the Summit Certs global parameter.

Copy the certificate file to the Thor VX9. The certificate file has a .CER extension. Locate the file and double-click on it.
Follow the

Certificate Wizard

instructions below.

Troubleshooting:

If the Certificate Wizard does not start automatically when you double-tap the certificate .CER file, follow

the

Manual Launch

instructions below.

For Windows 7, If presented with a security warning, confirm that you want to open the file.

Summary of Contents for Thor VX9







































































































































































































Search results

Summary of Contents for Thor VX9

Reviews:

Related manuals for Thor VX9

Brands by name

Popular brands

Honeywell Thor VX9, User Manual

Search results

Summary of Contents for Thor VX9

Reviews:

Related manuals for Thor VX9

Brands by name

Popular brands