Honeywell Thor VX8, Reference Manual

Page: 85 / 228

Setting System Time and Date
1. If the Thor VX8 is not already powered up, turn it on.
2. During bootup the F2 or Del key (depending on BIOS type) key may be pressed to enter BIOS Setup. Press F2 or Del
immediately.
3. At the BIOS Setup Main Menu, move the highlight to the Time parameter.
4. Type the desired entry and then press the Tab key to move from hours to minutes to seconds. The colons are
automatically added by the system.
5. Press the Down Arrow to move to the Date parameter.
6. Type the desired entry and then press the Tab key to move from month to day to year. The backslashes are
automatically added by the system.
7. Exit BIO setup by selecting Save Changes and Exit or Save and Exit , depending on BIOS type, to save the changes.
Press Enter .
If the Thor VX8 does not automatically reboot, turn the Thor VX8 off and then on again.
Note: The date and time may also be set using the Windows interface. Click on the time in the system tray or select Date
and Time from the Windows control panel to open the Date/Time control panel.
3-27