manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 96 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 96

84

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of Lid)

This option requires DC/DC external power supply Honeywell Part no. 9000313PWR-
SPLY.

If the DC/DC power supply does not have screws in the side of the lid, see 

60-144 VDC 

Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)

.

These instructions are for use with 

VM1D Standard Dock

 and 

VM3D 

Enhanced Dock

 only.

Shown With Lid Attached

•

Lid is secured with screws on the 
side of lid.

Shown With Lid Removed

•

Input and output connector blocks 
under lid.

•

One positive (Vin+), negative (Vin-) 

and ground (

) connection in 

input block. 

•

One positive (Vo+) and negative 
(Vo-) connection in output block.

Caution:  For installation by trained service personnel only.

Caution:  Usage in areas where moisture can affect the power supply 

connections should be avoided. The power supply should be 
mounted in a dry location within the vehicle or placed in a 
suitable protective enclosure.

Caution:  Use caution when routing the power cable. See 

Power Cable 

Cautions

.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments