70
Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide
Procedure - U Bracket Assembly
Equipment Needed: Sockets and a Torque wrench capable of measuring to 50 inch
pounds (5.64±.56 N/m).
Note:
Torquing tool is not supplied by Honeywell.
Torque Measurement
You will need a torquing tool capable of torquing to 35-50 inch pounds (1.10 N/m).
Torque all screws and bolts according to the following table:
Mounting Positions
The adapter bracket can be mounted in a high or low position, depending on viewing
position, as shown below.
Additionally, the slotted U bracket allows the Thor VM3 to be mounted vertically or tilted
forward or backward for best viewing angle.
For these bolts…
Torque to
1/4-20x5/8 Bolts
50 in/lb (5.6 N/m)
M5x16mm Bolts
35 in/lb (4.0 N/m)
1/4 Bolts (user supplied)
50.0±5 in/lb (5.64±.56 N/m)
[
Summary of Contents for Thor VM3
