Honeywell Thor VM3 User Manual Download Page 277

Page: 277 / 378

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

265

Install a Root CA Certificate

Copy the certificate file to the Thor VM3. Import the certificate by navigating to Start >
Control Panel > Certificates.

Tap the Import button.

Make sure From a File is selected and tap OK.

Using the explorer buttons, browse to the location where you copied the certificate,
select the certificate desired and tap OK.

Tap Yes to import the certificate.

Once the certificate is installed, return to the proper authentication section, earlier in
this manual.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Search results

Summary of Contents for Thor VM3

Reviews:

Honeywell Thor VM3, User Manual, Page: 277 / 378

Search results

Summary of Contents for Thor VM3

Reviews: