manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 25 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 25

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

13

VMXD Enhanced Dock for Off-Vehicle Use

Caution:  This dock is designed for AC power (non vehicle-mounted) 

applications only.

SKU

VMX005VMCRADLE

Power 
Connection

AC/DC Adapter

Serial Ports 

COM1 and COM2

USB Ports

USB1 port provides host connection via an adapter cable. This port also supports 
Honeywell external keyboards.
USB2 port provides two USB host ports via an adapter cable.
Direct USB host connection on top of dock.

Ethernet

RJ-45 Ethernet connection on top of dock.

CANbus

CANbus connection via an adapter cable

Audio

Headset connection via an adapter cable

Screen 
Blanking

Supported via COM1 and COM2 connectors.

Ignition 
Control

Supported

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments