manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 205 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 205

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

193

PC Connection

Start > Settings > Control Panel > PC Connection

Use these options to control a cabled connection (USB, serial) between the Thor VM3 
and a nearby desktop/laptop computer.

Factory Default Settings

Tap the Change button to change the direct connect setting. 

Tap the drop-down box to view a list of preconfigured connection settings.

The Thor VM3 does not support a USB client connection. ActiveSync is only available via 
serial connection.

In order to use a serial port for ActiveSync, the port must be disabled in 

Enterprise 

Settings

 and pin 9 must be set to RI in 

Options

.

Enable direct connection

Disabled

Connect using 

ActiveSync

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments