manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 18 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 18

6

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

About this Guide

This user’s guide has been developed for a Thor VM3 with a Microsoft

® 

Windows

®

 

Embedded Compact 7 operating system.

Out of the Box

The following items may be packaged separately:

•

Thor VM3

•

Standard or Enhanced Dock (includes 10-60VDC power cable)

•

RAM or U-Bracket vehicle mount kit

If you ordered additional accessories for the Thor VM3, verify they are also included with 
the order. Keep the original packaging material in the event the Thor VM3 should need 
to be returned for service. For details, see 

Product Service and Repair

.

P8

P1

P14

P7

P13

P6

P12

P5

P11

P4

P10

P3

P9

P2

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments