Honeywell Thor VM3 User Manual Download Page 172

Page: 172 / 378

160

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Certificates

Start > Settings > Control Panel > Certificates

Manage digital certificates used for secure communication.

Note:

Digital certificates are date sensitive. If the date on the Thor VM3 is incorrect, wireless
authentication will fail.

The Certificates stores tab lists the certificates trusted by the Thor VM3 user.

These values may change based on the type of network security resident in the client,
access point or the host system.

Tap the Import button to import a digital certificate file.

Tap the View button to view a highlighted digital certificate.

Note:

Tap the Remove button to remove highlighted certificate files.

Note:

Tap the ? button and follow the instructions in the Windows Help file when working with
trusted authorities and digital certificates.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Search results

Summary of Contents for Thor VM3

Reviews:

Honeywell Thor VM3, User Manual, Page: 172 / 378

Search results

Summary of Contents for Thor VM3

Reviews: