manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 164 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 164

152

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Accessibility

Start > Settings > Control Panel > Accessibility

Customize the way the Thor VM3 keyboard, sound, display, mouse, automatic reset and 
notification sounds function. There are a few changes from general Windows desktop 
Accessibility options. 

The following exceptions are due to a limitation in the Microsoft Windows Embedded 
Compact operating system:

•

If the ToggleKeys option is selected, please note that the ScrollLock key does not 
produce a sound as the CapsLock and NumLock keys do.

•

If the SoundSentry option is selected, please note that ScrollLock does not produce 
a visual warning as the CapsLock and NumLock keys do.

Tab

Contents

Keyboard

Sticky Keys - Disabled (cannot be enabled). 
ToggleKeys - Disabled by default. Tap the 

Use ToggleKeys

 checkbox to enable this option. 

Tap the Settings button to view or change parameters.

Sound

SoundSentry is disabled by default. Tap the 

Use SoundSentry 

checkbox to enable this 

option. Tap the Settings button to view or change parameters.

Display

High Contrast is disabled by default. Tap the

 Use High Contrast

 checkbox to enable this 

option. Tap the Settings button to view or change parameters.

Mouse

MouseKeys is disabled by default. Tap the 

Use MouseKeys

 checkbox to enable this option. 

Tap the Settings button to view or change parameters.

General

Automatic reset is disabled by default. Tap the 

Turn off accessibility features

 checkbox to 

enable this option and use the dropdown option to assign a timer.
Notification is enabled by default. Sounds are emitted when turning a feature on or off.

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments